Car Paint Protection Film

How to apply

1. Mark the area to be protected on a sheet of paper to project onto the protective film later, or mark directly on the back of the film.
2. Cut out the marked shape and round off all sharp corners.
3. Use the included preparation wipe to clean the surface where the film will be applied.
4. Spray water on both the application surface and the film.
5. Apply the protection film. The water allows you to reposition the film.
6. Use the included spatula to remove all water and air bubbles underneath the film, starting from the center towards the corners.
7. Dry the area with a clean cloth.
8. Wait at least 15 minutes before driving and 24 hours before going through the car wash, allowing the film to adhere properly.